CCS Combo adapter – CCS 1 to CCS 2 Fast Charge Adapter – charge USA made EV’s in Europe
Please note: the adapter DOES not have an amperage limiter. It is not recommended to use it with fast charge stations with a current above 150Amps.
How to use Fast Charge :
1.Plug in the Combo 2 end of the adapter to the charging cable
2.Plug in the Combo 1 end of the adapter to your EV’s charging socket
3.After the adapter has clicked – it is ready for the charge
After you you are done with the charging session, disconnect the vehicle side first and later the charging station side.
How to store:
It is important to keep adapter protected. Store it in a dry place. Moisture in the contacts may result in malfunctioning. If adapter gets wet place it in a warm and dry place for 1-2 days. Avoid to leave the adapter outside where the sun, wind, dust and rain can get to it. Dust and dirt will result in the cable not charging. For longevity, ensure that your charging adapter is not twisted or excessively bent during the storage. Best to keep it it in storage bag.
The adapter is designed for both outdoor and indoor charging and it has IP54 (Ingress Protection). Therefore, this means that it has protection from dust and splash of water from any direction.
CCS Combo adapter – Technical information CCS 1 to CCS 2 Charge Adapter
|Max Power||90 kW|
|Maximum Current||150 A|
|Operational Voltage||600 V/DC|
|Operational Temperature||-30 °C to +50 °C|
|Degree of Protection||IP54|